Quantcast
Channel: Cisco/Linksys Network Storage Devices
Viewing all 90 articles
Browse latest View live
↧

Nas200 Problems

November 10, 2014, 1:17 pm
$
0
0
I have a Nas200 which was working fine for a while.
Then it suddenly stopped seeing Disk #2. It would recognize disk in bay 2 after every 3-4 restarts.
Anyway, I did a hard reset, thought that might help, but the unit does not seem to be resetting. Tried both hard and soft resets (by pushing a button on the back, waiting for two beeps and also by administration page). Tried resetting with disks in bays and without them, but still no luck. NAS200 does not reset any configurations (passwords,...

Nas200 Problems
↧
Search

An amule guide? maybe :P

November 27, 2014, 2:18 pm
$
0
0
An amule guide? maybe :p - INTRO

My main goal is to have a “how to†on the amule configuration file, the tools we will use to manage this and some minor info about them and also a different way to alter the amule.conf file to our computer, some steps you should do to be able to share the downloads of amule within your ftp
and finally a brief explain of some of the lines in amule.conf file that I can understand and you will need to make it work normally.
Later I will alter the web...

An amule guide? maybe :p
↧
↧

Regenerating Keys for JAC4 on NAS200

December 11, 2014, 7:13 am
$
0
0
Hi,

I've inherited a NAS200, and first thing I did was to flash the JAC4 firmware onto it.
However, it seemed to crash on first bootup after flashing it - I left it for a couple of hours and it still had not booted up - and now I cannot SSH onto the NAS200 - I keep getting "ssh_exchange_identification: read: Connection reset by peer"

I'm assuming that the key generation probably did not complete. Is there a way I can make it regenerate the SSH keys without SSH ?
↧

multiple linksys products all in one network

December 29, 2014, 2:51 pm
$
0
0
I have the following:

2 linksys wet610n
1 Linksys wrt300n
1 Linksys ea6350
1 Linksys wrt54g2
1 Lynksys E4200
5 Linksys camera wvc80n
one usb hard disk
One Hp 1120n


Ideally I would like to create a network at home that would allow me to get the same wired or wireless access anywhere within my home.

I think I should use the 1 Linksys ea6350 as a router, disable dhcp on the wrt300n,wrt54g2 and E4200.
What I do not know is, considering that I just want to have good internet access and setup the...

multiple linksys products all in one network
↧

How to improve NAS200 performance

February 19, 2015, 12:09 pm
$
0
0
Hi everybody,

I´m opening this thread to discuss/focus on how to improve NAS200 performance.
Maybe by software, maybe by hardware changes.
I know that there is a lot of people with different knowledge and experience in this forum so maybe after a brainstorm we can come up with good ideas, maybe not but we don´t loose anything by participating and trying right?

So to start with this "brainstorm" here are my first ideas:

  • Hardware: for what I saw in the CPU specs sheet...

How to improve NAS200 performance
↧
↧

NAS200 and SMART interpretation ;)

July 13, 2015, 10:03 am
$
0
0
Hi,

Whats is Your opinion :)

When I check SMART status from web interface system return SMART = OK

but under console

my second drive is Seagate 1TB (I hate this manufacturer)

$ /usr/sbin/smartctl -A /dev/sdb
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always -...

NAS200 and SMART interpretation ;)
↧

New life in NAS200? ?Raspberry?

August 11, 2015, 7:51 am
$
0
0
Hello,

Has anyone tried to put in Raspberry in NAS200

Its simple small computer with much more performance than NAS200 cpu and he have video output

Some time ago I buy 3,5" sbc with intel pentum m 2.0 MHz but he is litte too large to fit this in chassis.

on market I see few clones Raspberry. I try to find somthing aka Raspberry with two sata connectors.

anyone try to do it before?

cheers
↧

Which firmware do you use with the NSLU2 ?

August 11, 2015, 8:10 am
$
0
0
I'm using OpenWRT/Kamikaze with my SLUG.

der_Kief
↧
Search

Logging using PUTTY.

September 4, 2015, 5:45 am
$
0
0
How to logging to NAS200 via SSH using PUTTY?
↧
↧

Adding more RAM to NAS200

November 4, 2015, 3:33 pm
$
0
0
According to R8610-G specification, processor supports maximum 128 MB memory space.
Code:
16-bit data width:
[B]One Chip Select[/B]
[I]Memory Size            SDRAM Type
                         x 8                  x 16[/I]
2MB                                         1Mb x 16 x 1
4MB                   2Mb x 8 x 2
8MB                                         4Mb x 16 x 1
16MB                  8Mb x 8 x 2           8Mb x 16 x 1
32MB                 16Mb x 8 x 2          16Mb x 16 x 1...
Adding more RAM to NAS200
↧

NAS200 My cooling mod

November 15, 2015, 4:21 am
$
0
0
Hi,

Because I'm very pleases how NAS200 work, I make decision for maxumum upgrade and buy two disk Hitachi Ultrastar 2*2TB. In my hose network, NAS200 cooperate as backup with main server EX470.
Of course I use software attached to NAS200 called NTI shadow for backup family hd moves and photos. On new disks, full backup process should take about 7 days, but after three hours smart report near 58 degrees of Celsius.
Hitachi specification inform about 60dC as maximum. This situation force me...

NAS200 My cooling mod
↧

How can I open case to programming jtag nas200

November 22, 2015, 9:01 am
$
0
0
Hi,
Can anyone tell me how can I open case to show mainboard nas200? I try to remove silver cover but I do not want destroy ..it looks like it is glued or something?
regards
↧

Unable to access Linksys NAS200 WEB Interface

January 22, 2016, 4:07 pm
$
0
0
I am hoping one of you Linksys GURU can help me with my Linksys NAS200 problem.
Problem: Unable to access the WEB/admin GUI interface at "ip_address_nas200"
Error msg : page not found

I have 3 of these units.

#1 I am able to access the unit through Linksys setup CD. Format disks, access the WEB GUI at "ip_address_nas200" and get to the advanced setup so all is good with this unit.

#2 I am able to access the unit through Linksys setup CD, format disks but unable to access the admin GUI at...

Unable to access Linksys NAS200 WEB Interface
↧
↧

Programming serial jtag nas200

January 30, 2016, 2:25 pm
↧

NAS200 backup using JAC firmware

April 25, 2016, 2:25 pm
$
0
0
I'm trying to make a backup of my NAS200. I've been running Grsync from a Linux box, but it is very slow (over a week to transfer 200G, less than half). No real surprise on speed.

So I thought I'd try backing up from the command line to an external USB drive. Then I could create a good start on the Linux box and use Grsync for updating.

I tried
tar -cvzf /harddisk/volume_6/data/HDD_2_1/directory.gz /harddisk/volume_2/data/directory.

This generated
tar: "Names longer than 100 chars...

NAS200 backup using JAC firmware
↧
Search

How to access the gateway "Linksys SPA122 ATA with Router" by console

May 3, 2016, 1:58 am
$
0
0
Hello,

I want to automate the gateway configuration using IHM.
For this I would like to know is there a solution to access the gateway by console.

Thank you.
↧

Sercomm Upgrade tool won't work

January 3, 2017, 2:40 am
$
0
0
I downloaded Upgrade_207_XP.exe, the Sercomm Upgrade tool,
but it will not run on my XP machine.
It keeps telling that it can not find the file Upgrade_207_XP.exe or one of its components.
Any suggestions?

Thanks!

Joost
↧
↧

NAS200 - Problem with "removed drive"

December 11, 2017, 4:01 am
$
0
0
I still use NAS200 because it's simple and does the job.
Few days ago I noticed that I can't turn it on. I removed "Disk 1" and I found that there is something wrong with the disk (white smoke is not a good sign). I got another used HDD. I inserted it in Disk 1 slot and nothing. I format the drive -> nothing. I even deleted everything on drive -> nothing. I used another disk -> nothing.
Than I inserted Disk 2 into slot for Disk 1 and I got the message that Disk 1 is Changed. In information...

NAS200 - Problem with "removed drive"
↧

Linksys Wireless-G ADSL Home Gateway WAG200G

February 1, 2018, 2:21 am
$
0
0
Hey, i am trying to to block some websites & with keywords for the certain PA by MAC address in the above mentioned modem router.It is not working.

Also i am assigning the timings for internet (Its working).

Please see the attached photo

Let me know what is the mistake
↧

JAC4 compromised image (hacked malware)

May 29, 2018, 11:44 am
$
0
0
I may be one of a few people still running a NAS200, recently I noticed it was running very slow. A little digging revealed it was proxing hundreds of connections per hour, if not more. Upon booting the device would connect to ya.ru and hostby.channelnet.ie . The included toolset on busybox wasn't enough for me to find the actual executable running this stuff. I was unable to see the PIDs of the open ports and all processes seemed "normal."

Some packet sniffing showed even more...

JAC4 compromised image (hacked malware)
↧
Viewing all 90 articles
Browse latest View live
Search